convert 6030b to 6030 - GSM-Forum

saddam_lobaed · 01-19-2006, 20:20

good day friends

with the help i found in this forum i manage to convert 6030b to 6030 and it is very easy

1- change the RX filter of 6030b from any other phone (nokia 3100 will work)
2- full erease and re programme the phone with 6030 flash
3- write good 6030 pm
done

if you take good look at the schematich you will find that you dont neet to change the TX filter coz the are the same in both model.

now i need you help to give a good PM of 6030 coz i dont have one
best regards

dead_dogy · 01-19-2006, 20:34

I am not sure that TX filters are same,they can look same but have different part numbers,so check your solution and post result!

saddam_lobaed · 01-21-2006, 20:04

i already check the functionalti of the conversion without changing the TX filter and it works ok except that somtimes i have error in connection which i want the PM to make the final test.

note : after erease i only flash the phone with MCU, PPM, CNT so i need the PM for this reseaon

bes regard

OvidelGSM · 01-21-2006, 20:06

what is the difference from this two phones ?

Syed · 02-06-2006, 02:23

here it is.. check and post results...
(remove .doc extension)

WBR
Syed

Aymen G · 02-22-2006, 16:33

good work i will try it !

I just change the RX filter and the phone work fine !

I_sumo · 02-23-2006, 09:19

But why only 900Mhz ?? Wat about 1800 MHz !!

Syed · 02-23-2006, 10:37

Quote:

Originally Posted by I_sumo

But why only 900Mhz ?? Wat about 1800 MHz !!

both will work

just change both filters

WBR
Syed

cellbank · 04-04-2006, 07:37

i full erase my 6030b and write 6030 but after flash my phone is auto shut off, i write pm fr syed, i tried flashing back to 6030b but still auto shut off, im using ufs

Syed · 04-04-2006, 14:29

no need erase.
just flash normally and write PM i popsted here

if ur phone auto power off check IMEI maybe u damaged it and its now ?????????????

WBR
Syed

cellbank · 04-05-2006, 05:18

my imei is not damage not ???????? just the same b4 i flash

sajib_ngage · 04-05-2006, 11:57

i just chang RX filter and flash normaly it is work fine.

cellbank · 04-06-2006, 04:52

what if i had erased flash b4 flashing, is there any other way to repair my fone?

paklink · 06-08-2006, 11:01

Quote:

Originally Posted by cellbank

i full erase my 6030b and write 6030 but after flash my phone is auto shut off, i write pm fr syed, i tried flashing back to 6030b but still auto shut off, im using ufs

remove ur filter then check it hope u will know

some time filter when change then damage
so plz check it & post rsult

bhuvanele · 06-15-2006, 14:01

i full erase my 6030b and write 6030 but after flash my phone is auto shut off, i write pm fr syed, i tried flashing back to 6030b but still auto shut off, im using ufs

just changa the crystal , and reflash , all wil b ok

Quote:

Originally Posted by cellbank

i full erase my 6030b and write 6030 but after flash my phone is auto shut off, i write pm fr syed, i tried flashing back to 6030b but still auto shut off, im using ufs

just change the crystal, reflsh , all wil b ok, tested

02-22-2006, 16:33	#6 (permalink)
Aymen G Freak Poster Join Date: Mar 2005 Location: Tunisia Age: 43 Posts: 437 Member: 127608 Status: Offline Thanks Meter: 46	good work i will try it ! I just change the RX filter and the phone work fine ! Last edited by Syed; 03-31-2006 at 19:40.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
convert 6030b to 6030	maka_gsm	Nokia Digital Core Technology 4 ( DCT-4 )	13	12-09-2009 13:21
Convert 6030b to 6030	haiishq	Nokia Hardware & Hardware Repair	2	11-01-2007 16:49
Converting 6030b to 6030	saifsourceit	Nokia Digital Core Technology 4 ( DCT-4 )	12	06-29-2007 21:42
Convert 6030b to 6030 Failed	celluniversal	Nokia Hardware & Hardware Repair	4	05-03-2007 08:45

01-19-2006, 20:34	#2 (permalink)
dead_dogy Freak Poster Join Date: Feb 2004 Location: Sofia,inside LG Age: 42 Posts: 421 Member: 51693 Status: Offline Thanks Meter: 9	I am not sure that TX filters are same,they can look same but have different part numbers,so check your solution and post result!

01-21-2006, 20:04	#3 (permalink)
saddam_lobaed Junior Member Join Date: Mar 2005 Age: 51 Posts: 4 Member: 127501 Status: Offline Thanks Meter: 3	i already check the functionalti of the conversion without changing the TX filter and it works ok except that somtimes i have error in connection which i want the PM to make the final test. note : after erease i only flash the phone with MCU, PPM, CNT so i need the PM for this reseaon bes regard

01-21-2006, 20:06	#4 (permalink)
OvidelGSM No Life Poster Join Date: Jan 2005 Location: Worldwide Posts: 1,433 Member: 103544 Status: Offline Sonork: 100.75677 Thanks Meter: 155	what is the difference from this two phones ?

02-23-2006, 09:19	#7 (permalink)
I_sumo No Life Poster Join Date: Sep 2003 Location: INDIA Posts: 605 Member: 38103 Status: Offline Sonork: 100.100782 Thanks Meter: 165	But why only 900Mhz ?? Wat about 1800 MHz !!

04-04-2006, 07:37	#9 (permalink)
cellbank Freak Poster Join Date: Apr 2005 Age: 51 Posts: 125 Member: 137671 Status: Offline Thanks Meter: 8	i full erase my 6030b and write 6030 but after flash my phone is auto shut off, i write pm fr syed, i tried flashing back to 6030b but still auto shut off, im using ufs

04-04-2006, 14:29	#10 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	no need erase. just flash normally and write PM i popsted here if ur phone auto power off check IMEI maybe u damaged it and its now ????????????? WBR Syed

04-05-2006, 05:18	#11 (permalink)
cellbank Freak Poster Join Date: Apr 2005 Age: 51 Posts: 125 Member: 137671 Status: Offline Thanks Meter: 8	my imei is not damage not ???????? just the same b4 i flash

04-05-2006, 11:57	#12 (permalink)
sajib_ngage Temporary banned !! Join Date: Mar 2006 Location: Dhaka, Bangladesh Age: 37 Posts: 2,359 Member: 243500 Status: Offline Sonork: 100.1590322 Thanks Meter: 584	i just chang RX filter and flash normaly it is work fine.

04-06-2006, 04:52	#13 (permalink)
cellbank Freak Poster Join Date: Apr 2005 Age: 51 Posts: 125 Member: 137671 Status: Offline Thanks Meter: 8	what if i had erased flash b4 flashing, is there any other way to repair my fone?