Adl Loader does not start - GSM-Forum

funk999 · 10-20-2006, 15:54

Hi

Theres a good few of us having the problem below but no one has the answer and is ignored so im posting a thread on it and ask someone please if you had this problem how did u fix it. ive tried it on xp home and pro no luck, i am using pheonix 2006-156. on my nokia n70 via usb on the 3 network. i even tried on a freshly installed pc

Steps ive taken

1. Uninstalled everything
2. Used nokia software to delete registry entries, went to c:/program files deleted nokia folder

3. installed diego
4. installed pheonix 2006-156 + use dongle hax successfully
5. overwrite pheonix with the patched file

rebooted

==================================
1. sw update= fls not detected

=================================

2
Flashing failed.
Error occured during the flashing procedure.
HRESULT 0x8401225a (-2080300454)
Flash: Adl Loader does not start. This may happen if USB has not yet configured, in this case wait USB to configure and restart the operation. In X products this can mean that wrong dcm dll is used
===============================

3.
Ape->Communication verified to Adl Loader
Cmt->Estimated flashing time 4 min 58 sec
Cmt->Trying to verify communication 1 of 1
Cmt->Failed to verify communication.
Cmt->Trying to verify communication 1 of 3
Cmt->Trying to verify communication 2 of 3
Cmt->Trying to verify communication 3 of 3
Cmt->Failed to verify communication.
CMT loader does not start, remove battery to get phone back to normal mode

irawan388 · 10-20-2006, 15:58

please explain what box are u use and what phone u flashing and version of software......?

mc123 · 10-20-2006, 19:26

common problems-clean uninstall stuff left in prog files/common files/nokia
installation phoenix drivers in win/system/should be in /system32

funk999 · 10-20-2006, 19:37

i will delete files from coommon files and try 2nite, but i did install it on a freshly formatted machine.. so no cure as yet

funk999 · 10-21-2006, 22:51

are any other people getting this error?

Spool · 10-22-2006, 04:28

try coping the content of the folder CDMA to folder Phoenix

Malyshz · 10-22-2006, 10:24

Quote:

Originally Posted by funk999

are any other people getting this error?

yeap, i get this error

use older phoenix

funk999 · 10-22-2006, 16:21

which older one should i use.. if you have please send me i tried 153 same error

cellboy · 10-22-2006, 18:32

intall new pc suite and make sure nokia connectivity dingle is properly install.

dazza7111 · 10-23-2006, 19:28

If you get the ADL Loader could not be found error try moving all the ADL files from C:\Program Files\Common Files\Nokia\Tss\Flash to C:\Program Files\Nokia\Phoenix\Flash, then click Start again.

funk999 · 10-24-2006, 20:47

i will try that, but my fone is completely dead now and ive sent it to 3, whom i hope will make it alive again, it should be back tomorow

lunarsearcher · 10-25-2006, 10:32

Hey guys,

after 3 weeks trying nearly everything i finally have the solution (at least for me) - use Phoenix 130

Installed and worked perfect

funk999 · 10-25-2006, 13:14

okay i got my fone back, its dead, i know if i dead flash it i can revive it, i dont have dead flashing feature on my pheonix, how do i get it, i tried setting to no connection

funk999 · 10-25-2006, 13:45

oops123 · 10-26-2006, 07:35

i already writer, but repeat

.
I have dead nokia 6280 after flash error. (phoenix 2006).
---
I tried flash as dead usb, but got error message Adl loader not start
i viewed what transfer phoenix to phone via usb.

phoenix:
get 1 block data from phone (length=0x300)
send block in config core.
send 116 blocks (length one block=0x1000) (ULO)
send 5 blocks (length one block = 0x1000)(adl loader)
all blocks data to send in phone, phoenix get in file *.mcusw

after phoenix send last block, phoenix waited usb, but phone switched off, and windows remove all drivers from system.

in time phoenix show message try verificate communication.

after 50 seconds phoenix say "Adl loader not start"

any ideas ?

p.s.
Sorry for my eglish.

10-20-2006, 15:54	#1 (permalink)
funk999 Junior Member Join Date: Oct 2006 Posts: 28 Member: 374157 Status: Offline Thanks Meter: 0	Adl Loader does not start Hi Theres a good few of us having the problem below but no one has the answer and is ignored so im posting a thread on it and ask someone please if you had this problem how did u fix it. ive tried it on xp home and pro no luck, i am using pheonix 2006-156. on my nokia n70 via usb on the 3 network. i even tried on a freshly installed pc Steps ive taken 1. Uninstalled everything 2. Used nokia software to delete registry entries, went to c:/program files deleted nokia folder 3. installed diego 4. installed pheonix 2006-156 + use dongle hax successfully 5. overwrite pheonix with the patched file rebooted ================================== 1. sw update= fls not detected ================================= 2 Flashing failed. Error occured during the flashing procedure. HRESULT 0x8401225a (-2080300454) Flash: Adl Loader does not start. This may happen if USB has not yet configured, in this case wait USB to configure and restart the operation. In X products this can mean that wrong dcm dll is used =============================== 3. Ape->Communication verified to Adl Loader Cmt->Estimated flashing time 4 min 58 sec Cmt->Trying to verify communication 1 of 1 Cmt->Failed to verify communication. Cmt->Trying to verify communication 1 of 3 Cmt->Trying to verify communication 2 of 3 Cmt->Trying to verify communication 3 of 3 Cmt->Failed to verify communication. CMT loader does not start, remove battery to get phone back to normal mode Last edited by funk999; 10-20-2006 at 17:44.

10-22-2006, 16:21	#8 (permalink)
funk999 Junior Member Join Date: Oct 2006 Posts: 28 Member: 374157 Status: Offline Thanks Meter: 0	which older one should i use.. if you have please send me i tried 153 same error Last edited by funk999; 10-22-2006 at 17:15.

10-25-2006, 13:45	#14 (permalink)
funk999 Junior Member Join Date: Oct 2006 Posts: 28 Member: 374157 Status: Offline Thanks Meter: 0	Cannot dead flash

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
[6280] Dead phone, Adl Loader does not start :'(	bunyman	Nokia Base Band 5 ( BB-5 )	11	08-19-2008 09:14
Matching adl loader was not found for this device	fawxin	Nokia Base Band 5 ( BB-5 )	3	10-16-2006 21:49
K750i with "wait" bar that freeze, phone does not start. Have tried everything	MG77	Cruiser Suite	10	07-13-2005 15:23
Z600 Camera Does Not Start	TONYTONY	Sony Ericsson Hardware Repair	6	03-22-2005 13:16
My sl45 does not start please help	Aztek	x1x to x45/x50	3	11-30-2002 21:01

10-20-2006, 15:58	#2 (permalink)
irawan388 Freak Poster Join Date: Jan 2005 Age: 54 Posts: 342 Member: 112087 Status: Offline Thanks Meter: 35	please explain what box are u use and what phone u flashing and version of software......?

10-20-2006, 19:26	#3 (permalink)
mc123 Freak Poster Join Date: Jun 2006 Posts: 214 Member: 286672 Status: Offline Thanks Meter: 5	common problems-clean uninstall stuff left in prog files/common files/nokia installation phoenix drivers in win/system/should be in /system32

10-20-2006, 19:37	#4 (permalink)
funk999 Junior Member Join Date: Oct 2006 Posts: 28 Member: 374157 Status: Offline Thanks Meter: 0	i will delete files from coommon files and try 2nite, but i did install it on a freshly formatted machine.. so no cure as yet

10-21-2006, 22:51	#5 (permalink)
funk999 Junior Member Join Date: Oct 2006 Posts: 28 Member: 374157 Status: Offline Thanks Meter: 0	are any other people getting this error?

10-22-2006, 04:28	#6 (permalink)
Spool Insane Poster Join Date: May 2004 Location: India Age: 52 Posts: 76 Member: 67256 Status: Offline Thanks Meter: 0	try coping the content of the folder CDMA to folder Phoenix

10-22-2006, 18:32	#9 (permalink)
cellboy Freak Poster Join Date: Jan 2005 Location: INTERNATIONAL Posts: 207 Member: 111714 Status: Offline Thanks Meter: 2	intall new pc suite and make sure nokia connectivity dingle is properly install.

10-23-2006, 19:28	#10 (permalink)
dazza7111 Freak Poster Join Date: Mar 2006 Posts: 109 Member: 252612 Status: Offline Thanks Meter: 22	If you get the ADL Loader could not be found error try moving all the ADL files from C:\Program Files\Common Files\Nokia\Tss\Flash to C:\Program Files\Nokia\Phoenix\Flash, then click Start again.

10-24-2006, 20:47	#11 (permalink)
funk999 Junior Member Join Date: Oct 2006 Posts: 28 Member: 374157 Status: Offline Thanks Meter: 0	i will try that, but my fone is completely dead now and ive sent it to 3, whom i hope will make it alive again, it should be back tomorow

10-25-2006, 10:32	#12 (permalink)
lunarsearcher Junior Member Join Date: May 2006 Posts: 7 Member: 278885 Status: Offline Thanks Meter: 0	Hey guys, after 3 weeks trying nearly everything i finally have the solution (at least for me) - use Phoenix 130 Installed and worked perfect

10-25-2006, 13:14	#13 (permalink)
funk999 Junior Member Join Date: Oct 2006 Posts: 28 Member: 374157 Status: Offline Thanks Meter: 0	okay i got my fone back, its dead, i know if i dead flash it i can revive it, i dont have dead flashing feature on my pheonix, how do i get it, i tried setting to no connection

10-26-2006, 07:35	#15 (permalink)
oops123 Junior Member Join Date: Aug 2006 Location: Russian, Saratov Age: 43 Posts: 19 Member: 339311 Status: Offline Thanks Meter: 0	i already writer, but repeat . I have dead nokia 6280 after flash error. (phoenix 2006). --- I tried flash as dead usb, but got error message Adl loader not start i viewed what transfer phoenix to phone via usb. phoenix: get 1 block data from phone (length=0x300) send block in config core. send 116 blocks (length one block=0x1000) (ULO) send 5 blocks (length one block = 0x1000)(adl loader) all blocks data to send in phone, phoenix get in file .mcusw after phoenix send last block, phoenix waited usb, but phone switched off, and windows remove all drivers from system. in time phoenix show message try verificate communication*. after 50 seconds phoenix say "Adl loader not start" any ideas ? p.s. Sorry for my eglish.